Produtos

SE5202

Serial Server Ethernet p/ 2 Portas Seriais RS-232/422/485 com conectores DB9

Orçamento

Descrição

SE5202 – Serial Server Ethernet p/ 2 Portas Seriais RS-232/422/485 com conectores DB9

With ATOP’s SE5202 Series, you can transform any serial device into an Ethernet-capable one, allowing you to control and monitor your legacy serial devices via your LAN or WAN – and also over the internet.

With such connectivity, the amount of time required to configure or troubleshoot a serial device located on a factory floor or in a remote location is eliminated. Another key point: with such Ethernet-based connectivity, serial devices can be integrated into modern practices such as Industry 4.0 and IIoT, allowing you to extend their lifetime and avoid wholesale device upgrades in the near future.

Featuring 2 x software-selectable Serial Port and 1 x RJ45 Port or SFP Slot, the SE5202 Series is a simple-to-install device, with easy configurations options such as Telnet, Web browser, or other Windows utilities. And using the VirtualCOM software, Windows-based applications can access serial devices by mapping the virtual com ports to the SE5202 serial server series.

Encased in a rugged metal housing offering high EMC protection, the SE5202 Series is ideal for industrial and manufacturing automation applications, such as PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.

 

Features:

  • 2 x software-selectable RS-232/485/422 port
  • 1 x 10/100Mbps RJ45 Fast Ethernet port or 100Mbps SFP Slot
  • Supports TCP server/client, UDP, Virtual COM and Tunneling modes
  • Configuration via Web Server page, Telnet Console, and Windows Utility
  • Integrated SNMPv1/v2c/v3, HTTPS, Telnet and SSH configuration
  • Upgradable firmware via Ethernet from a remote-PC
  • Rugged metal casing; industrial EMC protection
  • Redundant dual DC power inputs for non-stop operation
  • Optional DIN-Rail mounting

Especificações

NETWORK INTERFACE
Ethernet Port 1x 10/100BASE-T(X) RJ-45 or 1x100BASE-FX SFP Slot
Compliance IEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-T(X) and 100BASE-FX
SERIAL INTERFACE
Connector 9-Pin D-Sub9 connector(Male, -DB version) or 5-Pin Terminal block (-TB version)
Ports 2
Mode 1x RS-232(Full-function DB9)/RS-485(2 and 4 wire)/RS-422, software selectable
1x RS-232/RS-485(2 and 4 wire)/RS-422, software selectable
Baud Rate 1200~230,400 bps
Parity None, Odd, Even, Space, Mark
Data Bits 7, 8
Stop Bits 1, 2
Flow Control None, Xon/Xoff, RTS/CTS (RS-232 only)
POWER
Connector 3-Pin 5.08mm Lockable Terminal Block and DC Jack for redundancy
Input Voltage 3-Pin 5.08mm Terminal Block: 9-30VDC; DC Lockable Jack 5VDC
Power Consumption <9W
Power Redundancy Yes
Reverse Polarity Protection Yes
PHYSICAL CHARACTERISTICS
Dimension (W x H x D) 75 mm x 85 mm x 28 mm (without wall-mount part)
SE5202-TB/SE5202-Sis: 74.5 x 108.2 x27.5mm (with wall-mount part)
SE5202-DB: 80.3 x 108.2 x27.5mm (with wall-mount part and DB9 connector)
SE5202-SFP-TB: 76.6 x 108.2 x 27.5mm (with wall-mount and SFP)
SE5202-SFP-DB: 81.4 x 108.2 x 27.5mm (with wall-mount SFP and DB9)
Weight 200g
Installation Wall-Mount or DIN-Rail (optional kit)
Reset Button Yes
ENVIRONMENTAL LIMITS
Operating Temperature -40°C ~ 70°C (-4°F ~ 158°F)
Storage Temperature -40°C ~ 85°C (-40°F ~ 185°F)
Ambient Relative Humidity 5 ~ 95% RH, (non-condensing)
SOFTWARE
Protocols TCP, IPv4, UDP, DHCP Client, HTTP, HTTPS, Telnet, ARP, SNMPv1/v2cv3
Configuration Atop Management Utility, Web UI, Telnet, CLI
VirtualCOM Windows/Linux redirection software
Link Modes – TCP Client Single destination or VirtualCOM
Link Modes – TCP Server 4 Connections; VirtualCOM or reverse Telnet
Link Modes – UDP Up to 4 Ranges IP

Downloads